Model:JTPSC-1
Communication mode ：1 road CAN @20kbps. 1 road 10/100baset LAN
Communication mode ：4 RS485 @ 9600bps
Communication distance ：CAN :≤1000m（RVSP 0.75*2 ）
LAN ：100 megabytes (over 5 lines).
Communication interface ：CAN Plug seat
RS485 ：Plug seat
Communication object ：CAN :A regional controller or a node controller.
LAN ：Rj45
LAN ：Network switch /PC
JTPSC-1 Zone vehicle Counting System
The Zone counting system is a control system based on the loop coil, parking space counting controller, parking space display and other media, which are connected by communication lines. The working principle is that we usually put a display at the entrance. this display can be used for parking space information in the parking lot. If the parking is full, FULL will be displayed to remind the customer not to go in for parking.
How does it work：
The working principle is that when the car enters the parking, it is detected by the loop coil, and the loop detector sends a signal to the controller. The controller processes it through internal specific software logic, enters a car, and the display screen It will reduce the number of available space. On the contrary, if exit one car, the display will increase the number of available car space. If no space for parking, the display will show FULL.
Installation Diagram And Application
Model:JT-LEDN511
Technology Parameter
Working voltage ：AC220V
Power ：≤10W(single-deck)
Working Temperature ：-20℃～+65℃
Environment humidity ：≤90%RH
Material ：Cold steel paint + plexi-glass panel
Communication object ：Connect to the sub-controller or detector
Communication distance ：≤300m
Photo source ：Highlight the LED with a visual Angle of 120
Communication mode ：RS485 @ 9600bps
Size
Model:LD-100
Technology Parameter
01 ：LINE ,(AC100V-AC240V)
02 ：NEUTRAL,(AC100V-AC240V)
03 ：N.O.of Relay B
04 ：COM.of Relay B
05 ：N.O.of Relay A
06 ：COM.of Relay A
07 ：LOOP
08 ：LOOP
09 ：Ground
10 ：N.C.of Relay A
11 ：N.C.of Relay B
Connection
Model:LD-200
Technology Parameter
01 ：LINE ,(AC100V-AC240V)
02 ：NEUTRAL,(AC100V-AC240V)
03 ：CH1 LOOP
04 ：CH1 LOOP
05 ：CH2 LOOP
06 ：CH2 LOOP
07 ：CH2 Relay COM
08 ：CH2 Relay N.O
09 ：Ground
10 ：CH1 Relay COM
11 ：CH1 Relay N.O
Connection
