System Introduction
JUTAI Single channel entry&exit Long Range RFID Reading Solution,it is for meet some special place, which only have one channel, and this channel is entry but also exit,it need long range attendance reading system for security:
| Model | Qty |
| BR-110 | 1unit barrier gate |
| LD-200 | 2pcs Double channel loop detectors |
| PUHF-9 | 2unit long range uhf readers |
| PUHF-L1 | UHF sticker |
| LD-100 | 1pcs single channel loop detector |
| AC-11 | 1pcs one door controller |
The working principle of the whole system is that when the car presses the double channle loop detector (we call as loop 1)trigger coil at the entrance, to trigger the reader to read the card, the reader reads the card, and the reader collects the tag data and transmits it to the access controler via Wiegand. The access control panel judges that the card number is valid, (the ID of the tag has been pre-stored in the access control panel), it will output an opening signal to the barrier gate control panel, the barrier will open, when the car passes the loop coil (we call as loop2)under the barrier arm,After that, the barrier will be automatically closed; when the car presses on the second double channel loop detector, (we call as loop 3)the exit uhf reader does not transmit the UHF ID number to the access control panel.We have activated the direction recognition function of double
channel loop detector.
In the opposite direction, when the car presses the double channle loop detector (we call as loop 1)trigger coil at the exit , to trigger the reader to read the card, the reader reads the card, and the reader collects the tag data and transmits it to the access controler via Wiegand. The access control panel judges that the card number is valid, (the ID of the tag has been pre-stored in the access control panel), it will output an opening signal to the barrier gate control panel, the barrier will open, when the car passes the loop coil (we call as loop2)under the barrier arm,After that, the barrier will be automatically closed; when the car presses on the second double channel loop detector, (we call as loop 3)the exit uhf reader does not transmit the UHF ID number to the access control panel.We have activated the direction recognition function of double channel loop detector.
Product Specifications
Door Access controller
Parking barrier gate
UHF long range reader
UHF sticker/tag
Vehicle loop detector(single channel)
Vehicle loop detector(dual channel)
Loop cables
System Diagram
