1. GateLink Remote System
JUTAI GateLink Automation Solution for Parking lot, an extension of residential smart gate solution, is an innovation of automatic sensing application for door’s opening and closing compared with the traditional long- distance card reader system. It’s principle is that the GATE remote control takes power through the car’s USB charging port. Within a sensing range of 30 meters, the remote receiving relay device will receive the signal and transmit USB ID to the access control device through the Weigand output. The USB ID numbers are saved in the CPU of the device in advance. The device will output a relay signal to the gate opening interface of the boom barrier’s control board when the ID is judged to be valid, and the barrier arm is up after receiving the signal. The barrier gate will automatically falls when the car passes over the anti-smashing ground sensing coil of the barrier.
2. Advantages of GateLink Remote
❀ Simple usage: works with the receiver only by powering up the gatelink USB.
❀ Anti-copy: the latest new chip encryption technology is adopted.
❀ Good economic interest: distributors can encrypt the system and prevent from the copy of remote controls by the external devices.
❀ Huge market potential: the system can be used in community access control, the residential access control with the GATELINK solution, wireless lighting control, and other expandable wireless application scenarios.
❀ For applying the gateLink USB system on the entire access control system, three solutions are offered.
3. There are 4 solutions
Solution 1
Off-line Gatelink remote control application(no software required)
Working Procedure
❀ The car presses the loop coils at the entrance, triggering the work of the remote controls’ receiver to receive the USB ID number and send it to the AC868 access control device via Weigand.
❀ AC868 access control device receives the signal of remote(ID numbers are preserved in advance), and output a relay signal to the controller panel in the boom barrier when the ID is judged to be valid, and the barrier is open after receiving the signal. No signal with invalid ID.
❀ Boom barrier arm is up when the controller panel receives the signal by AC866 access control device.
❀ Boom barrier arm falls when the car passes over the loop detector coil.
❀ Off-line application doesn’t support local internet and record checking by software.
GateLink remote control of local system application; (with PC software)
Working Procedure
❀ The car presses the loop coils at entrance, triggering the work of the remote controls’ receiver to receive the USB ID number and send it to the AC-11 access controller panel via Weigand.
❀ AC-11 access controller panel receives the signal of remote(ID numbers are preserved in advance), and output a relay signal to the controller panel in the boom barrier when the ID is judged to be valid, and the barrier is open after receiving the signal. No signal with invalid ID.
❀ Boom barrier arm is up when the controller panel receives the signal byAC-11 access controller panel.
❀ Boom barrier arm falls when the car passes over the loop detector coil.
❀ The access records in the controller panel will be transmitted to the PC software via TCP/IP.
❀ This solution is belong to internet usage, supports local internet and can check access records via software.
Solution 3
GateLink remote control application based on the cloud system
Working Procedure
❀ The car presses the loop detector coils at the entrance, triggering the work of the remote controls’ receiver to receive the USB ID number and send it to the W4G cloud board via Weigand.
❀ W4G cloud board receives the signal of remote(ID numbers are preserved in advance), and output a relay signal to the controller panel in the boom barrier when the ID is judged to be valid, and the barrier is open after receiving the signal. No signal with invalid ID.
❀ Boom barrier arm is up when the controller panel receives the signal by W4G cloud board.
❀ Boom barrier arm falls when the car passes over the loop detector coil.
❀ W4G cloud board can link the LED display through 485 output to display the ID number of each card and the expired cards, and can connect to the LCD display for advertising broadcasts, and generate expected commercial and advertising value.
❀ The access records in the W4G cloud board will be transmitted to the cloud software background via TCP/IP or wirelessly transmitted via the mobile phone SIM card.
❀ This solution is belong to large-scale cloud access control applications, which supports remote cloud operations. View access records in the background by accessing the cloud IP address.
❀ USB gatelink
